價格：免費
更新日期：2019-04-18
檔案大小：7.8M
目前版本：6.50.09
版本需求：Android 4.0 以上版本
官方網站：http://www.bilan.pl
Email：android@bilan.pl
聯絡地址：Pracownia Projektowa BILAN ul.Niemcewicza 28/1a 50-238 Wrocław
NEW VERSION!
Application designed to assist the Engineer on site and in the office.
All-In-One - ventilation, heating, potable water.
SIMPLE version is intended only for private use - NON-COMMERCIAL !!!
COMMERCIAL version available at Bilan HVAC for Tablets
Version for mobile available at Bilan HVAC Simple
NOTE - The application can run on older configurations to several seconds !!! Please calmly wait!
Differences between the SIMPLE and the standard version at the bottom of the page.
Basic features:
Tab VENTILATION
Tab STREAMS
For a given dimension of the flow duct selection depending on the speed or noise
The term for this duct:
- Air flow resistance,
- Speed,
- Noise,
- Selection of the size of the duct so as not to exceed the speed condition - only Standard,
- Selection of the size of the duct so as not to exceed the noise condition - only Standard,
Tab CHANGE OF CONTROL - only the PRO
The full calculation of the change of ventilation, endearing:
- The power of the heater,
- The power of the radiator overt,
- Latent cooling power,
- Moisture condensation,
- The required power-heater.
Tab INSULATION - only the PRO
Determination of heat loss and temperature drop in the duct
Tab SMART - only Standard
Hydraulics calculations carried out in a simplified way, giving the minimum amount of data, and at the same result obtained in the form of a rapid use of the site. In the future there will appear other conversion.
HEATING
* Hydraulics:
- Conversion under a stream of liquid to various media.
- Finishing panels pipe diameters based on the criterion of speed or pressure.
* Finishing panels regulating valve on the basis of the authority or the required resistance.
* Calculations of heat loss through the insulation - only Standard.
* Sizing WTP, and the translation of hardness.
* Calculations surface and pipe capacity - only Standard.
WATER
* Hydraulics system.
* Devices and fire hydrants.
* Pipe insulation - only Standard.
* Expansion vessel.
* Calculations hot tap water tank and the heat-up.
Tab CONVERIONS
Tab ACOUSTICS - only the PRO
The conversion of acoustic noise dB per dB (A) and NR curves.
Tab UNITS
Exchange units:
- length,
- mass,
- flow,
- pressure,
- energy.
In SIMPLE - only number "1", with 2 decimal place
In addition, version Standard with respect to Simple is characterized by:
- The possibility to use commercial
- The lack of an Internet connection,
- Remembering user settings
- Automatic change of scale for ANY application after starting,
- The lack of advertising,
VENTILATION
- The choice duct size as not to exceed the speed condition,
- The choice duct size as not to exceed the noise condition,
- Smart tab,
HEATING
- Selecting any of the pipe.
- Pipe material - in addition:
* HDPE SDR 17
* PERT-Alu-PERT
* PEX
* Crimp systems (steel / stainless steel / copper)
* Stainless high
- Change roughness.
- Additional Factors - glycols,
- Calculation of pipe insulation.
CONVERSION
- Translating for any input,
- Conversion of any number to the nearest 6th decimal place.
Version Pro with respect to Standard is characterized by:
VENTILATION
- Transformation IX central.
- Calculation of the duct insulation.
- Calculations and acoustic conversion.
HEATING
- Any agent.
- Any diameter.
- Additional fluids - thermal oils.
If you want to translate the program into your own language - write to me. The PRO version for free!
